Adafruit Ultimate GPS Breakout - 66 channel W/10 Hz updates - Version 3
This is the ultimate GPS module for your Raspberry Pi, Arduino or other microcontroller project!The breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation. Includes an ultra-low dropout 3.3V regulator so you can power it with 3.3-5VDC in, 5V level safe inputs, ENABLE pin so you can turn off the module using any microcontroller pin or switch, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. If you want to have an LED on all the time, we also provide the FIX signal out on a pin so you can put an external LED on.Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability. The module has a standard ceramic patch antenna that gives it -165 dB sensitivity, but when you want to have a bigger antenna, you can easily add onees with one fully assembled and tested module, a piece of header you can solder to it for breadboarding, and a CR1220 coin cell holder. Battery not included.Many tutorials available at Adafruit's website.
Features of Adafruit Ultimate GPS Breakout - 66 channel W/10 Hz updates - Version 3
- -165 dBm sensitivity, 10 Hz updates, 66 channels
- 5V friendly design and only 20mA current draw
- Internal patch antenna u.FL connector for external active antenna
- Built-in datalogging
- Perfect for Raspberry Pi, Arduino and more!
Specifications of Adafruit Ultimate GPS Breakout - 66 channel W/10 Hz updates - Version 3
Write a review
Note: HTML is not translated!
Enter the code in the box below: