3/4 inch D-RING SHACKLES - GALVANIZED (PAIR) (4X4 VEHICLE RECOVERY)
The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality D-ring shackles with adequate load rating, when venturing offroad.Note: paint on pin is a brand marker and will peel off revealing hot-dipped galvanized surface.
The effectiveness of this equipment is directly related to the manner in which it is installed, used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Billet4x4.
Features of 3/4 inch D-RING SHACKLES - GALVANIZED (PAIR) (4X4 VEHICLE RECOVERY)
- Working Load Limit permanently cast on every shackle.
- Forged - Quenched and Tempered, with alloy pin.
- Rust resistant Galvanized finish.
- IN STOCK - SHIPS TODAY!
- 9,500 lb Working Load Limit. 47,500 lb Ultimate Strength. 7/8 Pin Diameter.
Specifications of 3/4 inch D-RING SHACKLES - GALVANIZED (PAIR) (4X4 VEHICLE RECOVERY)
|Manufacturer Part Number||SHG234|
Write a review
Note: HTML is not translated!
Enter the code in the box below: