CARCHET Auto LED Flash Light Strobe Controller Flasher Module 2 Ways Durable
1. Working voltage: 12V DC
2. Max. power: 12V/48W
3. Working temperature: -40 to 50 Celsius
4. Dimension: 46x28x13mm
5. Housing Material: black ABS
6. Flash modes:
a. long light mode
b. 4 group lights flash alternately
c. 12 group lights flash together
d. alternately flash
e. 3 group lights quick flash alternately
f. 4 group lights flash together
g. 4 group lights flash alternately fisrt, then flash together
h. all lights flash alternately and off
i. all lights flash alternately and off, then flash and off together
j. all lights flash and off togetherUsing method:
1. Connect cable with strobe controller. In order to prevent poor contact, please connect the cable carefully.
2. About the red & black cable (about 1.2m length): connect the red cable with positive electrode of power, and black cable with negative electrode.
3. About black white & black cable (about 3m length), 2 pcs, black white cable connect with light positive electrode, and black cable with negative electrode.
4. Turn on the input power, press strobe controller MODE button for 2 to 3 seconds to launch this controller. Short press MODE button to change flash modes.
5. Avoid water and solarizationWith fixed sticker for the strobe controller and LED indicator on the controller
This is 2 way strobe controller
1 x Strobe controller
1 x Cable bundle
1 x Paster
Features of CARCHET Auto LED Flash Light Strobe Controller Flasher Module 2 Ways Durable
- Small in size, easy to operate, convenient to install
- Up to 10 flash modes, support various LED products connection
- Can observe outside flash modes when you are inside
- Low consumption & long lifespan
- Suitable for car, motorcycle, etc.
Specifications of CARCHET Auto LED Flash Light Strobe Controller Flasher Module 2 Ways Durable
|Shipping Country||HONG KONG|
|Shipping Time||Approximately 2-5 weeks.|
Write a review
Note: HTML is not translated!
Enter the code in the box below: