Rejex Synthetic Vehicle Wax Polymer Coating 16 Ounce

0 reviews  
Brand: Industrial Parts House
SKU: CA11AFL7RME1H
Model: 1310036
Availability: Only 3 left in stock.
This item has been sold: 3 times
Price:
$20.02
Shipping:-$4.95
Qty: - +
 
   - OR -   
Tags: rejex wax

Rejex Synthetic Vehicle Wax Polymer Coating 16 Ounce

RejeX is a thin-film polymer coating designed to provide a high-release protective finish for vehicles of all kinds. This very thin film left by RejeX- less than a micron thick and prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. NOTHING STICKS BUT THE SHINE! RejeX also makes graffiti easy to remove and can be applied to windshields to repel rain. It's easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months. RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting. REJEX APPLICATION Ideally, RejeX should be applied to a cool, dry, clean surface. When over 85° F, be sure to apply RejeX out of direct sunlight. If the surface is too hot, the coating can cure before it has properly bonded to the surface, so it may not perform up to its potential. RejeX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 8-12 hours (depending on the humidity; the higher the humidity, the faster the cure). Curing is required to allow the monomers (polymer building blocks) that make up RejeX to attach to the surface being treated and to crosslink into a crystal-clear, impervious film. It is important to allow RejeX to cure for 8-12 hours after the haze has been wiped off. If the coating is exposed to contaminants such as oil, fuel, soot, hard water, tree sap, cleaners, etc. before it has cured, the contaminants may interfere with or imbed in the protective film. REJEX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. RejeX can be applied in multiple coats, allowing 8 hours

Features of Rejex Synthetic Vehicle Wax Polymer Coating 16 Ounce

  • SPACE AGE PROTECTION FOR YOUR CAR, TRUCK, BOAT, RV, AIRPLANE & MOTORCYCLE
  • RejeX is a thin-film polymer coating designed to provide a high-release protective finish
  • NOTHING STICKS BUT THE SHINE

Specifications of Rejex Synthetic Vehicle Wax Polymer Coating 16 Ounce

GENERAL
Shipping Weight3 pounds

Write a review


Your Name:


Your Email:


Your Review:

Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: