KENWOOD KAC-7406 CAR AUDIO 800W WATT 4/3 CHANNEL POWER AMP AMPLIFIER

0 reviews  
Brand: Kenwood
SKU: CA11AKC4ROV35
Model: KAC-7406
UPC : 019048205568
Availability: Only 1 left in stock.
Price:
$245.57
Shipping:-$9.95
Qty: - +
 
   - OR -   
Tags:

Kenwood KAC-7406 Car Audio 800W Watt 4/3 Channel Power Amp Amplifier

Title 4/3 Channel Power Amplifier Amplifier Type Class AB CEA-2006 Primary Ratings Power Output 60Watts RMS x 4 at 4 Ohms and ≤1%THD N Signal-to-Noise Ratio 80dBA (Reference: 1Watt into 4Ohms) Maximum Power Output MAX POWER 800W Power Output Rated Power at 14.4V 60Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤1.0% THD) 90Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.0% THD) 180Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.0% THD) Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V) Frequency Response 5Hz-50kHz ( 0dB, -3dB) Class AB Input Impedance 10k ohm Speaker Impedance 4Ω (2Ω to 8Ω allowable) Bridged connection 4Ω to 8Ω allowable Audio Section Low-Pass Filter Bch Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct) High-Pass Filter Ach Built in High-Pass Filter (80Hz, -12dB/oct) Filter Selector 1 Bch LPF-OFF Filter Selector 2 Ach HPF-OFF RCA Input Sensitivity 0.2[V] - 5.0 [V] Speaker Level Input Sensitivity 4.0[V] - 12.0 [V] Terminals Battery & Ground Screw Type Terminal Block (Ni) (M6) Speaker Output Screw Type Terminal Block (Ni) (M4) Line In RCA (Ni) Speaker Input JST Connector General Dimensions(WxHxD) 315 [mm] x 56 [mm] x 200 [mm] 12-3/8 inch x 2-3/16 inch x 7-9/16 inch Weight  (kg) 2.1 [kg] 4.6 [lbs] Operating Voltage 14.4V(11-16V allowable) [V] Current Consumption 29 [A]

Features of Kenwood KAC-7406 Car Audio 800W Watt 4/3 Channel Power Amp Amplifier

  • Power MOS-FET Switching Power Supply
  • Rated Input Power 4 ohms 60W x 4 2 ohms 100W x 4 Bridged 200W x 2
  • Specifications Signal to Noise Ratio: 100 dB Low Pass Filter: 50 - 200 Hz (-12 dB / oct.) High-Pass Filter: 50 - 200 Hz (-12 dB / oct.) Bass Boost: 40 Hz (0 - 18 dB) Size(inch): (W)13-3/16
  • Speaker Level Input /2 Ohms Load Capability
  • Signal Sensing Turn-on / Cast Aluminum Heat Sink Design

Specifications of Kenwood KAC-7406 Car Audio 800W Watt 4/3 Channel Power Amp Amplifier

GENERAL
Model NumberKAC-7406

Write a review


Your Name:


Your Email:


Your Review:

Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: