Panavise In Dash Mount Nissan Altima Coupe 08 to 12, Sedan 07 to 12

Brand: Panavise
Model: 75131-207
UPC : 729315312072
Availability: Only 3 left in stock.
Qty: - +
   - OR -   

Panavise In Dash Mount Nissan Altima Coupe 08 to 12, Sedan 07 to 12

PanaVise Custom InDash Mount for the Nissan Altima. Model #: 75137-207. The Panavise InDash Custom Mount eliminates exposed holes in vehicle for clean, easy, and nearly invisible phone mount installation. Proudly made in the USA from the highest quality heavy gauge steel, this Panavise Custom Indash Mount has been fitted and produced specifically for your car to provide the utmost convenience and practicality. Complete mounting instructions are included with your purchase and are also available below. . Compatible Car: . 2007-2009 Nissan Altima Sedan 2008-2009 Nissan Altima Coupe; Mounting Instructions:. Mounting Location: Right of Climate Control . Tools Required: Dash Tool, Hook tool, Soft Cloth, Phillips Screwdriver. Hardware Included: (2)A-#8x9/16"Needle Pt.Screw. Step# 01. Remove the cover plate below the climate control by inserting hook tool into the front side of the cover plate and pull and tilt out to release.. Step# 02. Remove the air vents by inserting the hook tool into the side, and pull to release (1) clip. Repeat on the other side. Carefully pull out the air vent assembly, disconnect plugs as necessary. There are (3) clips on top of the air vent that are released by tilting the air vent out.. Step# 03. With Phillips screwdriver, remove (4) screws, (2) below climate control, (2) above the radio. Pull out radio and climate control assembly releasing (4) plastic clips. Set on a soft cloth on the console. Disconnect climate control plug, and pull out radio further and set off to the side.. Step# 04. Place the InDash by PanaVise Mount on the right side of the radio cavity, on the flat space about the middle of the side below the (2) clip slots. Install the (2) supplied screws.. Step# 05. Replace the radio/climate control assembly, air vent assembly, and lower cover plate in reverse order.. If we don't have it listed please email us..

Features of Panavise In Dash Mount Nissan Altima Coupe 08 to 12, Sedan 07 to 12

  • Made in USA from 14 Gauge Steel, powder urethane coated
  • Professional Installation Recommend
  • For clean, easy, nearly invisible phone mount installation
  • Properly install your cellular phone or hands-free kit without entering the airbag deployment zone

Specifications of Panavise In Dash Mount Nissan Altima Coupe 08 to 12, Sedan 07 to 12

Shipping Weight1 pounds
Item model number75131-207

Write a review

Your Name:

Your Email:

Your Review:

Note: HTML is not translated!

Bad           Good

Enter the code in the box below: