AspenTek 10 Pcs 10mm Wide LED Strip Light Connector Adapter 4 Conductor, for 5050 RGB LED Strip Light, No Need Welding
UPC : 799491677548
Promotion Offer - Get 5% Discount, Use Coupon Code WBS2017
AspenTek 10 Pcs 10MM Wide LED Strip Light Connector Adapter 4 Conductor, for 5050 RGB LED Strip Light, No Need Welding
This solder-less connector is an idea way to link two pieces of LED strip lights together.The connectors allow you to link LED strip light together and save the time consuming task of soldering. The plastic connectors on either end of the wire simply open up and allow 5050/3528 rgb color LED strip to be inserted, once closed they provide a strong connection which will provide power to the LED strips.
Intended use: It fits 3528 or 5050 rgb LED strip
• Ensure the four solder joints on pcb board are clean
• Open the white clasp of the connector
• Insert the LED light strip into the clasp and fix it under the prongs - please pay attention to the positive electrode. The black wire is the correponding positive(" ").
• Close the clasp well to make a solid connection
1)This connector is mainly used for conductive connection.If you want fixed connection,please do the soldering.
2) If the PCB board is so thin that it could not be fixed firmly by the connector box, you may fix a little tape or a small piece of masking to make the PCB board enough thick, thus the connector could connect the strip light firmly and work smoothly.
3)To connect waterproof led strip light, it add an additional job for you. Please clean up the the rubber to make sure the end of strip light is non-waterproof and clean. Then insert it into the connector box, thus the connector can connect the led strip light firmly.
10 pcs LED Strip light connector adapter
Â·In terms of product details or questions, please first contact our customer service center by email.
Â·Warranty: All products enjoy 12 months warranty.
Features of AspenTek 10 Pcs 10MM Wide LED Strip Light Connector Adapter 4 Conductor, for 5050 RGB LED Strip Light, No Need Welding
- Suitable for 10 mm 5050 rgb led strip light or 3528 rgb led light stirp
- No need welding or soldering;easy to connect
- 10mm wide;15cm/6Inch length for every cable
- cut the strip on the cut line;splice the ribbon electrically with this jumper and bend the wires whatever angle you require
- 4 pin 22AWG flexible copper wire
Specifications of AspenTek 10 Pcs 10MM Wide LED Strip Light Connector Adapter 4 Conductor, for 5050 RGB LED Strip Light, No Need Welding
|Technical Details||no welding rgb led strip light connector|
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: