Evapo-rust Cooling System Cleaner Concentrate 32 Oz
EVAPO-RUST Cooling System Cleaner is a concentrated rust removing formulation based on our 3-TIME AWARD WINNING rust remover technology. EVAPO-RUST Cooling System Cleaner, when used as directed, is non-corrosive to steel and will not harm copper, brass, aluminum, plastic, rubber, silicone, wood or vinyl. EVAPO-RUST Cooling System Cleaner will not remove coatings such as non-oxide paint or chrome that are still bonded to the surface. Not designed for use with magnesium or magnesium alloys.DIRECTIONS1) Drain the water/anti-freeze from cooling system.er cooling system cleaner2) Pour 1 quart (32 ounces) into cooling system for every 2 gallons of water/anti-freeze removed.3) Add water to cooling system until full.4) Start engine and allow engine to run with heater on for 1 - 2 hours.5) Drain (solution should be grey to black) and flush radiator/cooling system. Repeat steps 1 - 5 once more if necessary. Please remember the larger flakes of rust will deposit, it is very important to remove all rust before re-filling.6) Fill cooling system with appropriate anti-freeze/coolant. (Check out our IceClear HD and BioTherm Fluids HD glycerin based coolants.)
Free shipping to continental US only. Seller expressly warrants that the product conforms to its chemical description. There are no warranties associated with sale of the product either express or implied including but not limited to the warranties of fitness for a particular purpose or use.
Features of Evapo-rust Cooling System Cleaner Concentrate 32 Oz
- Professional Results
- Not an eye or skin irritant
Specifications of Evapo-rust Cooling System Cleaner Concentrate 32 Oz
|Item model number||ERCSC32|
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: