Lubricant/Corrosion Inhibitor, 1 Gal.
Lubricant/Corrosion Inhibitor, Lubricant, Straw, Gallon Can, Clear, Sraw Colored Liquid, 7.8 pH, Flash Point (F) 405 Degrees F, 0.875 - 0.885 (less propellant) Specific Gravity, Brookfield HBF, 70 Degrees F, #2 spindle at 2 RPM, 3-5 reading (4, 800-5000 CPS) Viscosity Index, VOC Content less than 1 Percent, 7 Grease/Lubricants, Penetrants, and Specialty ChemicalsSolvent-Free Penetrants and LubricantsSolvent-free, nondrying, anticorrosive coatings protect metal from moisture, salt air and saltwater. Create a moisture barrier that provides long-lasting lubrication for moving parts. 10N784 and 10N783 are nontoxic and can be applied to damp surfaces. 10N785, 10N786, 10N787, and 10N788 are nonconductive. 10N785 comes with a brush applicator. 10N789 and 10N790 are nontoxic and can be used to remove heavy rust. Suitable for use on wire rope. 10N791 is suitable for use on wire rope and in open-gear applications.
Features of Lubricant/Corrosion Inhibitor, 1 Gal.
Specifications of Lubricant/Corrosion Inhibitor, 1 Gal.
|Manufacturer Part Number||CA|
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: