JL Audio 12W3v3-2 12" Single 2 ohm W3v3 Series Subwoofer 12W3v3
UPC : 699440921534
Only 3 left in stock - Order Now.
Promotion Offer - Get 5% Discount, Use Coupon Code WBS2017
JL Audio 12W3V3-2 12" Single 2 ohm W3V3 Series Subwoofer 12W3V3
This powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability. The 12W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Power Handling: Peak: 1000 watts RMS: 500 watts Recommended Power Range: 100-500 watts Impedance: Single 2 ohms Mineral-filled polypropylene upper cone with a metallic JL Audio medallion logo gives the W3's a whole new, classy and sophisticated look NBR (Nitrile Butadiene Rubber) surround DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output Perform outstanding in compact sealed or ported enclosures DMA (Dynamic Motor Analysis) modeling to deliver unsurpassed dynamic stability and low-distortion operation within intended power range Elevated Frame-Cooling creates a pathway for high-velocity air to flow directly across the top-plate and onto the voice coil Vented Reinforcement Collar improves the rigidity and stability Insert Molded Suspension Coil Terminal Sub-Assembly ensures precise lead wire length, lead wire entry and exit angles Customizable Trim Ring can be painted to match the installation theme Floating Cone Attach Method allows the cone and surround to be aligned independently of the spider/coil assembly Surround Stress-Relief promotes smooth, consistent surround behavior at all excursion levels Efficiency: 87.15 dB
Features of JL Audio 12W3V3-2 12" Single 2 ohm W3V3 Series Subwoofer 12W3V3
- 12" Single 2 Ohm W3v3 Series Subwoofer
- Power Handling: 500W RMS / 1000W Peak
- Mineral-filled polypropylene upper cone with a metallic JL Audio medallion logo gives the W3's a whole new, classy and sophisticated look
- NBR (Nitrile Butadiene Rubber) surround
- Top Mount Depth: 6.65" , Cutout Diameter: 11.0625"
Specifications of JL Audio 12W3V3-2 12" Single 2 ohm W3V3 Series Subwoofer 12W3V3
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: