Scan-Speak Revelator 18W/4531G-00 6.5" Paper Cone Woofer, 4 ohm
It features a non-resonant cone and dust cap structure, dynamic linear suspension, SD-1 magnet system, "Grasshopper" cast chassis with maximized air flow and resonance terminating mounting system. Less resonance in all structures, lower compression and higher linearity, faster termination of excess energy and higher sound pressure capability. The 18W/4531G should have an F3 of about 65Hz sealed and 40Hz vented. Also an excellent choice for high end autosound applications. Outside diameter: 182mm Cut out: 156mm Depth: 77mm 25.4mm = 1" = 2.54cm Box suggestions: 0.3 to 0.4 cubic foot sealed with 20% filling for and F3 of 78Hz 0.7 cubic foot box with 2" vent by 7" long for F3 of 45Hz 1.0 cubic foot box with 2" vent by 5" long for F3 of 40Hz The Sealed alignment will go lower in a car with the car's cabin gain.
Features of Scan-Speak Revelator 18W/4531G-00 6.5" Paper Cone Woofer, 4 ohm
- Excellent choice for home or autosound
- Dynamic Linear Suspension
- Sliced Cone (Controls Cone Breakups)
- Patented Symmetrical Drive (SD-1) motor
- Fantastic bass and midrange
Specifications of Scan-Speak Revelator 18W/4531G-00 6.5" Paper Cone Woofer, 4 ohm
|Shipping Weight||6.5 pounds|
|Item model number||18W/4531G-00|
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: