RAIN COLLECTOR HEATER
Use in cold climates to measure freezing rain or the moisture content of snowfall. Includes 24-watt, 24-volt heater with thermal cut-off switch, control unit, insulating reflective blanket, and AC-power adapter and 50' (15 m) cable. Not for use with Solar Power Kit.
Features of RAIN COLLECTOR HEATER Keep snow from filling your Vantage Pro2 rain collector with this heater. Great for use in cold climates to measure freezing rain or the moisture content of snowfall.The heater warms the inside of the cone during cold weather. A thermostat switch turns the power off when temperatures rise and back on when they fall.Note: The heater must be plugged into an electrical outlet.Capable of melting liquid snow at a rate of 1/4 inch (6 mm) of liquid precipitation per hour.Warms only the inside of the rain collector and the cone itself.Off/On switch allows you to turn heater on when you expect freezing conditions, and turn it off again when weather warms.When turned on, the themostat switch turns power off if temperature reaches 110F (43C), and turns it back on with temperature drops to about 85F (30C).Cable length can be extended to 120 feet (36 m) with two-twisted pair wire; further with single pair cable.Not compatible with AeroCone rain cones.
Specification of RAIN COLLECTOR HEATER
|Dimensions ||10.25x7.75x2.75 inches|