Ideal Security Door Lever With Keyed Deadbolt Lock For Storm And Screen Doors, White (4-Piece Set)

Product DescriptionThe deluxe lever storm door handle and keyed locking set compliments a wide range of decor styles. This elegant and easy to operate handle can replace a push button handle that may be on your screen door. The screw posts must be 1-3/4 in. apart. The interior latch features an easy opening push movement which does not lock. The included keyed lock complements the appearance of the handle and provides additional security. Keep your main door open and enjoy the light that comes in through a storm door, and still feel secure. This is not a high security lock, but a secondary level of security. Install above or below the handle. Three additional holes are required to be drilled through the door for the screws and spindle for a new installation. This set includes everything needed for an installation and will fit doors from 1 in. to 2-1/8 in. thick. The spindle for the deadlock may be cut for your custom installation. Installation will take about 30 minutes. A tape measure, drill and screw driver may be required. A center punch to mark the holes is helpful. Before drilling, ensure that the inside latch and lock do not interfere with the operation of your main door handle. If it does, raise or lower the storm door hardware. This handle and key lock set will provide an added touch of class to any storm door. All 4 components are the same color or finish. Ideal Security has been supplying quality hardware to door manufacturers for over 50 years.The deluxe lever storm door handle and keyed locking set compliments a wide range of decor styles. This elegant and easy to operate handle can replace a push button handle that may be on your screen door. The screw posts must be 1-3/4 in. apart. The interior latch features an easy opening push movement which does not lock. The included keyed lock complements the appearance of the handle and provides additional security. Keep your main door open and enjoy the light that comes in through a storm door, and still feel secure. This is not a high security lock, but a secondary level of security. Install above or below the handle. Three additional holes are required to be drilled through the door for the screws and spindle for a new installation. This set includes everything needed for an installation and will fit doors from 1 in. to 2-1/8 in. thick. The spindle for the deadlock may be cut for your custom installation. Installation will take about 30 minutes. A tape measure, drill and screw driver may be required. A center punch to mark the holes is helpful. Before drilling, ensure that the inside latch and lock do not interfere with the operation of your main door handle. If it does, raise or lower the storm door hardware. This handle and key lock set will provide an added touch of class to any storm door. All 4 components are the same color or finish. Ideal Security has been supplying quality hardware to door manufacturers for over 50 years.From the ManufacturerThis deluxe storm door hardware set includes an elegant lever handle, interior latch, and keyed deadbolt It is compatible with most pre-installed handles, and compliments a wide range of décor styles. The elegant and easy to operate handle replaces the basic push button handle that may already be on your screen door. The interior latch features an easy opening push movement. The matching keyed deadlock lock provides additional security, so you can keep your main door open and enjoy the light and fresh air while still feel safe (this is not a high security lock, but a secondary level of security). The long-lasting finish will provide an added touch of class to any storm door. Installation This set includes everything needed for an easy installation and will fit doors from 1” to 2-1/8” thick. Installation should take about 30 minutes. When replacing an existing handle, the screw posts for the handle must be 1-3/4” apart. For new installations, three additional holes are required to be drilled through the door for the screws and spindle. The lock can be installed above or below the handle, depending on your preference. The spindle for the deadlock may be cut for your particular installation. A tape measure, drill and screw driver will be required. A center punch to mark the holes is helpful. Before drilling, ensure that the inside latch and lock do not interfere with the operation of your main door handle. If they do, raise or lower the storm door hardware. Ideal Security has been supplying quality hardware to door manufacturers for 60 years. Please explore our other door and window hardware products for your home.