ANCEL BA101 Professional 12V 100-2000 CCA 220AH Automotive Load Battery Tester Digital Analyzer Bad Cell Test Tool for Car/Boat/Motorcycle and More

ANCEL BA101 Professional 12V 100-2000 CCA 220AH Automotive Load Battery Tester Digital Analyzer Bad Cell Test Tool for Car/Boat/Motorcycle and More

BA101 Advantage: 1. Simple and easy to use2. Test batteries on and off the vehicle3. Accurate results in milliseconds4. Battery Life Analysis5. Analysis Result : Good or Replace6. Large easy to read LCD display. 7. Test results based on JIS, EN, DIN, SAE and IEC Standards. 8. Languages: English9. Quick test-input battery volume (AH), then it can show the battery status. 10. vehicle cranking system test--- cranking time, voltage and status. 11. vehicle charging system test-load voltage, unloaded voltage, ripple status and charging system status. 12. Store the testing result, print function BA101 Benefit: 1. Conductance correlates directly to the battery capacity2. Passive testing method is safe. 3. Never discharges or drain the battery. 4. Able to test condition of discharged battery. 5. Consistent and repeatable results. 6. Provides unique indication of battery conditions. 7. Provides check the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required. 8. Powers up when connected to the battery posts during testing. BA101 Function: Test Result: Good or Replace Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (m ) Life in percentage (%)Cranking system Charging system Application: Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported. Operating Parameters: System voltage: 12 Volts Input voltage range: 9V~15VPower requirements: No internal batteries required. Power on when hooked up during testing.

Features of ANCEL BA101 Professional 12V 100-2000 CCA 220AH Automotive Load Battery Tester Digital Analyzer Bad Cell Test Tool for Car/Boat/Motorcycle and More

Small compact design, faster scanning and direct display of test results. Even a beginner can analyze any 12 volt battery with this device. It shows you everything about the battery: Voltage, charge, starting power and remaining battery life (ohmic resistance level). And it does it quickly and accurately.

Much wider test range (100-2000 CCA) and more accurate than its competitors. Test results are based on JIS, EN, DIN, SAE, CCA, BCI, GB, CA, MCA and IEC standards.

Provides an opportunity to check the charging status of the alternator and the starter. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status.

The BA101 Battery Tester is well built and features a large LCD display with white backlighting and adjustable contrast that shows test results directly. No internal batteries are required and power is drawn directly from the 12V battery.

It comes with a 3. 0-foot cable and is made of a very thick, flexible insulator that is much safer than others on the market. There are 4 buttons on the BA101. The up/down button is used to scroll through the menu. The Enter and Exit buttons are used to navigate back and enter the menu.