Rp Remarkable Power 25 Inch Inlet Exhaust Flex Pipe 25 Id X 10 Inch Length Flexible Exhaust Tube Stainless Steel Double Bra

Rp Remarkable Power 25 Inch Inlet Exhaust Flex Pipe 25 Id X 10 Inch Length Flexible Exhaust Tube Stainless Steel Double Bra

There Is No Instruction Manual Professional Installation Is Highly Recommendedfitment Universal For 25 Inletoutlet Diameter Flex Pipe Product Specification Inlet Outlet Diameter 25 Inch Body Length 6 Inch Overall Length 10 Inch2 Extension Length Style Directly Weld On Material Stainless Steel Double Braided Construction Durable And Corrosion And Water Resistant Exquisite Workmanshippackage Included 1 X Flex Pipeinstallation Weld On How To Install The Flex Pipe1 Grab The Bolts Holding The Flex Pipe To The Flange On The Muffler With A Wrench Turn Counterclockwise To Remove Them Then Pull The Flex Pipe Out Of The Flange2 Remove The Clamp Holding The Flex Pipe To The Exhaust Downpipe3 Pull Out The Old Gasket That Sat Between The Flex Pipe And The Muffler Flange Then Clean Out The Flange4 Hammer Out Any Dents From The End Of The Exhaust Downpipe Loosen The Nuts Holding The Muffler And Downpipe 5 Coat A New Muffler Gasket With Exhaust Sealer Then Place It In The Muffler Flange And Fit The End Of The New Flex Pipe Over It6 Coat The End Of The Downpipe With More Exhaust Sealant And Place The Free End Of The New Flex Pipe Over It Adjust The Position Of The Muffler And Downpipe Until The Flex Pipe Is Straight But Free Of Tension7 Thread Bolts Through The Holes In The End Of The Flex Pipe Attached To The Muffler Flange Tighten Them To Secure The Pipe To The Flange8 Place A New Clamp Around The Flex Pipe Where It Meets The Downpipe And Tighten It Retighten The Bolts Holding The Muffler And Downpipe And Cut Any Plastic Ties That Are Wrapped Around The Flex Pipe

Features of Rp Remarkable Power 25 Inch Inlet Exhaust Flex Pipe 25 Id X 10 Inch Length Flexible Exhaust Tube Stainless Steel Double Bra

Package Include: 1 Piece Of 2.5 Inch Flex Pipe.

Exhaust Flex Pipe Size: 2.5 Id (2 1/2) Inlet Diameter 10 Inch Overal Length 6 Inch Braid Outside Diameter.

Exhaust Flex Pipe Material: Our 2.5 Inch Exhaust Flex Pipe Made Of Stainless Steel Double Braided Construction. It Can Reduce Vibration And Noise.

Exhaust Flex Pipe Fitment: Universal Fitment Exhaust Flex Pipe Is Installed In The Exhaust Pipe Between The Engine Exhaust Manifold And The Muffler. The 2.5 Inch Exhaust Flex Pipe Is Suitable For The Exhaust System Of Automobiles Trucks Buses And Other Vehicles.

Exhaust Flex Pipe Installation: Easy To Install Directly Weld On Or Clamp On With No Modification Required. Installation Instruction Is Not Included Professional Installation Is Highly Recommended.