PAC Radio Replacement interface with OnStar telemetics retention steering wheel control

PAC Radio Replacement interface with OnStar telemetics retention steering wheel control

2012-up GM trucks & SUVs equipped with factory non-navigation radios require the RP5-GM31
In Premium Amplified Systems there will be no fading capability of the aftermarket stereo
Does not retain factory XM tuner. This is built into the factory radio and is removed when the radio is removed.

An all in one radio replacement and SWC interface, the innovative new RadioPRO5 comes pre-loaded with OnStar retention, amplifier retention, SWC software, navigation based output signals and other features that save time and money during installation.

Product Features

Retains OnStar® when the factory radio is replaced
Retains Factory Bluetooth (2009+ model vehicles)
Retains rear seat audio controls
Retains all warning chimes (chime module included)
Retains back-up sensors/park assist
Retains factory BOSE audio systems
Retains factory premium BOSE audio (Y91 digital. does not support fading)
Built in pre-programmed SWC retention
Dual zone function
Chime volume adjustment (factory buttons)
OnStar volume adjustment
Retained accessory power output (R.A.P.)
Reverse Wire output
VSS (Vehicle Speed Sense) output
Illumination output
Parking brake output
Includes antenna adaptor
Retains lane departure warning system
Retains OnStar Turn-By-Turn voice prompts
In package updatable using the PAC-UP

Features of PAC Radio Replacement interface with OnStar telemetics retention steering wheel control

• Radio Replacement Interface With Built In OnStar Retention, Pre-Programmed Steering Wheel Control Retention and Navigation Output
• Retains OnStar when the factory radio is replaced
• Retains Factory Bluetooth (2009+ model vehicles)
• Retains rear seat audio controls
• Retains all warning chimes (chime module included)

Specification of PAC Radio Replacement interface with OnStar telemetics retention steering wheel control