PAC Radio Replacement interface with OnStar retention

PAC Radio Replacement interface with OnStar retention

Radio Replacement interface with OnStar retention for select 29-bit GM LAN vehicles with or without BOSE sound system
In-field updateable firmware via USB (using PAC-UP)
Retains OnStar® when the factory radio is replaced
Retains Factory Bluetooth (2009+ model vehicles)
Retains rear seat audio controls
Retains factory XM
Retains all warning chimes (chime module included)
Retains back-up sensors/park assist
Retains back-up camera signal
Retains factory BOSE audio systems
Retains factory premium BOSE audio (Y91 digital. does not support fading)
Supports non-amplified audio systems
Steering wheel control harness (pre-wired)
Dual zone function
Chime volume adjustment (factory buttons)
OnStar volume adjustment
Retained accessory power output (R.A.P.)
Reverse Wire output
VSS (Vehicle Speed Sense) output
Illumination output
Parking brake output

Included:
(1) OS-5 module
(1) Vehicle wiring harness
(1) Chime module
(1) Antenna adaptor
(1) Instruction manual

Features of PAC Radio Replacement interface with OnStar retention

• Retains OnStar when the factory radio is replaced
• Retains Factory Bluetooth (2009+ model vehicles) / Factory BOSE audio systems.Illumination output, parking brake output
• Retains rear seat audio controls
• Retains all warning chimes (chime module included)
• Retains back-up sensors/park assist/back-up camera signal
• Replacement interface for select gm vehicles with OnStar, Bose, and gm LAN data bus
• Compatible with or without factory amplified audio system1
• Can be used if the vehicle does not have OnStar
• Compatible with or without Bose systems
• Retains the 5.1 Digital audio system in select gm vehicles

Specification of PAC Radio Replacement interface with OnStar retention