PAC Replacement Interface for select Volkswagon Vehicles
SKU: WHOU-C2RVW2
Model: C2RVW2
UPC : 606523108836
Only 1 left in stock - Order Now.
US Delivery Time: 3-5 Business Days.
PAC Replacement Interface for select Volkswagon Vehicles
Provides navigation trigger wires and timed accessory output for replacing the factory radio and retains the factory installed amplified audio system.
Use with a steering wheel interface module to retain function of select factory controls (sold seperately)- no extra swi-can required.
Allows you to replace the factory radio in select 2002-2010 VW vehicles.
Provides Accessory, Parking Brake, Reverse, Illumination and VSS outputs on select vehicles.
Important Notes:
2010 Vehicles: The C2R-VW2 does not retain the digital amplifier in Dynaudio systems
2002-2005 Vehicles: You must be replacing a factory Double-DIN radio. If the vehicle came equipped with a Single-DIN radio, the C2R-VW2 is not compatible. The C2R-VW does not provide a Reverse output trigger. This signal is unavailable on the data bus.
2004-2007 Touareg: Does not retain digital audio amplified system seen when the vehicles is equipped with factory navigation radio
Steering Wheel Control Notes
2002-2005 vehicles (excludes Touareg)
Can program track up & down and volume up & down.
2006-2010 vehicles with Eight button SWC (excludes Touareg)
Can program volume up & down, phone button and star button without effecting Multi-Function Display (MFD). Arrow up & down can be programmed but will control MFD.
2009-2010 vehicles with 12 button SWC (excludes Touareg)
Can program left hand side of steering wheel volume up & down, track left & right, phone and mute buttons without effecting MFD. Arrow up & down on right side can be programmed but will control MFD.
2004-2010 Touareg
Can only program volume up & down
Features of PAC Replacement Interface for select Volkswagon Vehicles
- Keeps Data-Bus Intact for Vehicle Service & Emissions Testing
- Built in SWI-CAN
- Data controlled RAP accessory output wire
- Data controlled parking brake wire
- Facilitates replacement of a factory radio with a navigation radio while retaining the factory-installed amplified audio system (if equipped)
- Use with an steering wheel interface module to retain functions of all factory controls
Specification of PAC Replacement Interface for select Volkswagon Vehicles
Product Details | |
---|---|
Color | BLACK |
Size | 9in. x 9in. x 2in. |
Dimensions | 9x2x9 |
Weight | 1 |
Write a review
Your Name:
Your Email:
Your Review:
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.