Llpt 94 Adhesion Promoter 10 Sponge Applicator Wipes 1 Bottle Primer Supplement Increase Adhesion Primer For Permanent Acrylic Double Sided Adhesives Mounting Molding Tape

Llpt 94 Adhesion Promoter 10 Sponge Applicator Wipes 1 Bottle Primer Supplement Increase Adhesion Primer For Permanent Acrylic Double Sided Adhesives Mounting Molding Tape

LLPT 94 Adhesion Promoter 6 Sponge Applicators Increase Initial Adhesion Primer Suitable for Permanent Acrylic Double Sided Adhesives Mounting Tape Molding Tape 10 small packets wipes, single use applicator 1 bottle of primer supplement commonly used on low surface energy materials to increase the initial bonding strength extremely helpful for Acrylic Double Sided Adhesive for a secured bonding initial bonding 6 total packets, 2cc per packet Not only works on LLPT acrylic tapes, but also any other brands PRODUcT INSTRUcTION: completely use up this liquid contents as soon as possible after opening Apply a thin, uniform coating to the bonding surface, using the minimum amount that will fully coat the surface A wet coating thickness of 0002 inch or less is recommended Apply promoter only to areas that will be fully covered with tape and a drying time of 30 to 90 seconds is recommended For best results, apply tape immediately after primer application or no more than one hour afterwards Be sure the primed surface remains free from contaminants prior to tape application Wear gloves when you use this product to avoid any skin injury and see doctor immediately if swallow this product by accident Suitable on low surface energy materials before tape application to increase the initial bonding operation temperature is between 60oF - 90 oF coverage: approximately 150 square inchpacket (3 ml) cyclohexane: 45-50 M-Xylene: 10-15 O-Xylene: 5-12 Ethylbenzene: 3-5 Epoxy: 01-1

Features of Llpt 94 Adhesion Promoter 10 Sponge Applicator Wipes 1 Bottle Primer Supplement Increase Adhesion Primer For Permanent Acrylic Double Sided Adhesives Mounting Molding Tape

Many users told LLPT that the primer wipes dried out when they received it LLPT came up with the solution to improve package seals & providing extra primer supplement The new package improves the dried out issue significantly and extends the validation period up to 12 months (supplement is 3 years) If there is any sign of dry-out wipe, use the brush in the bottle to apply the primer on the surface and then use the sponge wiping all over the surface evenly for best bonding result commonly used on low surface energy materials to increase the initial bonding strength and curing better for long term performance of adhesive Extremely helpful for Acrylic Double Sided Adhesive for a secured bonding initial bonding 2cc per packet, use it within an hour after the packet is opened cover up and tighten the cap of supplement bottle right away after use Not only works on LLPT double sided acrylic mounting tapes, but also any other brands and compatible with 3M 4298 Adhesion Promoter