Vibra-Tite 122 Oil Tolerant Removable Anaerobic Threadlocker, 2Ml Bullet Tube, Blue

Vibra-Tite 122 Oil Tolerant Removable Anaerobic Threadlocker, 2Ml Bullet Tube, Blue

Vibra-TITE 122 Oil Tolerant Threadlocker is a medium viscosity, thixotropic, anaerobic thread locking adhesive for all types of metal, threaded fasteners cured performance shows controlled medium strength with good temperature and solvent resistance against water and nonpolar solvents This product cures rapidly on plated, oily metal surfaces or inactive surfaces Replaces lock washers and plastic inserts Locks machine tool access bolts, studs, and hydraulic system bolts Used on gear box boltsdrive shaft, bearing cover cap screws, counter sunk screws, conveyor roller bolts and construction equipment Ensure parts are clean, dry and free from oil and grease before use Product is normally hand applied from the bottle onto threaded parts Fixture Speed without Primer is 5-10 minutes at 77 degree F Shelf Life is 12 months at 68 degree F 24 hours at 68 degree F Full cure Time 38 Phos-oil 100 - 130 lbsinches Typical Breakaway Strength 38 Phos-oil 40 - 60 lbsinches Typical Prevailing Strength Product should be refrigerated at temperatures between 0 degree c to 35 degree c Optimal storage is 25 - 2 degree c Shelf life is 18 months from date of manufacture when stored at 25 - 2 degree c Seals nuts and bolts ranging from 14 to 34 (6-20mm) in diameter while allowing disassembly using standard tools 0015 inches Maximum gap fill 19570 lbs Torque strength, BreakPrevail 108 Specific gravity N or T Suggested primer 2 ml Bullet Tube

Features of Vibra-Tite 122 Oil Tolerant Removable Anaerobic Threadlocker, 2Ml Bullet Tube, Blue

Vibra-Tite 122 Oil Tolerant Removable Anaerobic Threadlocker, 2Ml Bullet Tube, Blue