Hayes 81725 Syncronizer Brake Control

Hayes 81725 Syncronizer Brake Control

Product DescriptionThe Syncronizer is a brake controller for single and tandem axle trailers equipped with electric brakes It modulates and controls the current from the battery to the trailer brakes The longer the brake pedal is depressed the greater the current delivered to the trailer brakes until the preset brake power setting is reachedAmazoncomThe Syncronizer is a brake controller for single and tandem axle trailers equipped with electric brakes It modulates and controls the current from the battery to the trailer brakes The longer the brake pedal is depressed the greater the current delivered to the trailer brakes until the preset brake power setting is reachedDigital time-based circuitry with automatic and user-adjustable settingsKey FeaturesQuik-connect featureFor all single and tandem axle trailers equipped with electric brakesDesigned for use on any 12-volt negative ground vehiclesFull 12-volt output provided with manual lever activationSuperior responsivenessFully adjustable gain setting wheelcompatible with all electronic systems (ABS, cruise, etc)Wide range of mounting positions perfect for steep dash surface mountingEasy adjustment and standard four-wire hookupTrailerTow vehicle stoplights operate when trailer brakes are applied automatically or with manual leverRed LED indicator displays braking intensity and warns of short circuitProvides automatic and manual brakingBuilt-in automatic current limiter protection from trailer brake wiring shortsEasy and Versatile Mounting The Syncronizer can be mounted at any angle and in any direction, and is ideal for steep dashes that make typical units difficult to mount It includes a mounting bracket and a standard four-wire hookup for quick and easy installation It must be mounted in a location where the driver can see the Red Indicator Light The driver must be able to reach and operate the manual slide Automatic Operation with Digital Display and SleepStandby ModesThe automatic mode modulates and controls the current from the battery to the trailer brakes and operates on a time-based circuitry The longer the brake pedal is depressed, the greater the current delivered to the trailer brakes The current will increase until it reaches the preset brake power adjustment setting The Power Wheel is used to adjust the amount of current to the trailer brakes It is responsible for obtaining smooth, proportional, and optimum tow vehicle and trailer brake responsiveness To increase the amount of current, rotate the power wheel upward toward the top of the case To decrease the amount of current, rotate the power wheel downward toward the bottom of the case Manual Operation and OverrideThe Manual Slide Lever is located on the front right side of the controller The further the manual slide lever is moved from the right to the left, the greater the amount of trailer braking power The manual slide lever operation is an independent circuit and overrides the power wheel adjustment to allow full braking effort when required Use the Manual Slide Lever to apply the trailer brakes independently of the tow vehicle brakes or to override the automatic trailer brakes when more braking or less braking is required The manual slide lever is used in emergency stop situations when more braking may be required than is available with the power wheel adjustment or for control of excessive trailer sway The indicator light will illuminate from dim to bright as the manual lever is applied and remains off when the manual lever is released The tow vehicle and trailer brake stoplights will still illuminate during the manual lever activation

Features of Hayes 81725 Syncronizer Brake Control

No level adjustment required Automatic and manual braking Quik connect installation save time Made in USA - lead Free Three year warranty