Rotary Lift Kits Cylinder Seal Kits Fits for SPO9 SP0A9 SPO7 SPOA7 SPO88 FJ783 FJ7664 Texas HYD, BH-7511-11,FJ783-12TH,Hydraulic Cylinder Kit Vanshly

Rotary Lift Kits Cylinder Seal Kits Fits for SPO9 SP0A9 SPO7 SPOA7 SPO88 FJ783 FJ7664 Texas HYD, BH-7511-11,FJ783-12TH,Hydraulic Cylinder Kit Vanshly

Fits For:SP55 SP80-4 SP80-5 SP84-8 SP84-9 SP89-10 SP84-11 SP84-16 SPO84 SPOA84 AR94 SP94 SPO94 SPOA84C AR98 ARO98 SPO82 SPOA82 SP88 SP98 SPO88 SPOA88 DCOA7 SPOA98 AR9 ARO9 SP7 SPO7 SPOA7 SP9 SPO9 SPOA9 TLO7 SPO12-10 Note:If your lift has a TEXAS HYDRAULICS cylinder in it, it will be approximately 72" tall with a small bleeder screw at the top. Look apprx 6" below the bleeder screw near the top of the cylinder to see ID stampings .If it reads "TXT" or "TH" followed by #s this is the proper seal kit for your lift. Also you may find fj7664 FJ783. These 2 numbers are the cylinder part numbers but you still need stampings "TXT" "TH" or "T" If you have your cylinder apart already, compare your piston seal with the one pictured to the left. Texas Hydraulic cylinders have distinctive yellow single lipped seal on the piston if they are original seals from rotary or may be black if they have been replaced. 1 year warranty.

Features of Rotary Lift Kits Cylinder Seal Kits Fits for SPO9 SP0A9 SPO7 SPOA7 SPO88 FJ783 FJ7664 Texas HYD, BH-7511-11,FJ783-12TH,Hydraulic Cylinder Kit Vanshly

v?Suitable For?:This kit came in the following model lifts and may fit others as well SP55 SP80-4 SP80-5 SP84-8 SP84-9 SP89-10 SP84-11 SP84-16 SPO84 SPOA84 AR94 SP94 SPO94 SPOA84C AR98 ARO98 spo82 spoa82 sp88 sp98 spo88 SPOA88 DCOA7 SPOA98 AR9 ARO9 SP7 SPO7 SPOA7 SP9 SPO9 SPOA9 TLO7 SPO12-10 | v?High-Quality?:This is 1 seal kit for the hydraulic cylinders found in Rotary 2 post lifts. It meets or exceeds factory specs. It fits lifts with capacity between 7,000 & 9000 pounds. This kit rebuilds TEXAS HYDRAULICS cylinders that rotary used through many years of production. This Kit Rebuilds 1 Cylinder | v?Note?:If your lift has a TEXAS HYDRAULICS cylinder in it, it will be approximately 72" tall with a small bleeder screw at the top. Look apprx 6" below the bleeder screw near the top of the cylinder to see ID stampings .If it reads "TXT" or "TH" followed by #s this is the proper seal kit for your lift. | v?Tips?:If you see the WORD "PACOMA" or "MADE IN GERMANY" then your cylinder is not a TEXAS HYDRAULIC and this seal kit will NOT work with your lift but we offers those seal kits as well in our related products section below. ALSO there is a universal rotary 2 post seal kit that fits virtually all rotary 2 post if no stamping numbers can be found. | v?Easy to install?:This kit usually takes less than an hour to install and can be done with a vice, pipe wrench and a few hand tools.