High Torque Clock Movement Mechanism With 178 Inch Long Clock Hands Black

High Torque Clock Movement Mechanism With 178 Inch Long Clock Hands Black

High Torque Clock Movement Mechanism With 178 Inch Long Clock Hands Features Total Shaft Length Is 22 Mm And Its Thread Length Is 97 Mm Applicable For 9 13 Mm 035 050 Inches Thickness Clock Panel Application You Can Use The Clock Movement To Repair Replace Or Make A Clock Suitable For Crossstitch Threedimensional Embroidery Craft Clock Frameless Draw Clock Etc Easy And Simple Design The Component Parts Are Easy To Assemble Together And The Pure Color Metal Hands Can Be Painted With Any Color To Match Your Clock Specifications Material Plastic And Aluminum Case Size Approx 55 X 55 X 16 Mm 22 X 22 X 063 Inches Hand Length Hour Hand Length Is 331 Mm 13 Inch Minute Hand Length Is 452Mm 178 Inch Power 15V Aa 1 X Battery Not Included Package Includes 1 X Quartz Clock Movement 1 X Close Nuts 1 X Minute Hand 1 X Hour Hand 1 X Plastic Washer 1 X Brass Washer 1 X Brass Nut 1 X Metal Hook Warm Notice There Are Some Clock Parts Made Of Aluminum Please Do Not Install Them With Too Much Pressure Or They Will Be Bent Please Check The Goods Within 24 Hours After Receiving Them If The The Size Of The Clock Movement Is Not Suitable Please Contact Us In Time

Features of High Torque Clock Movement Mechanism With 178 Inch Long Clock Hands Black

Clock Movement: High Torque Clock Movement With Hook Drive Long Clock Hands (10 Mm To 450 Mm) | Size From The Center Of The Hole To The Tip: The Hour Hand Is Approx. 331 Mm/ 13 Inches Long; The Minute Hand Is Approx. 452 Mm/ 17.8 Inches In Length | Total Shaft Length: 22 Mm (0.87 Inches) Thread Length: 9.7 Mm (0.38 Inches) Suitable For 9 - 13 Mm (0.35 - 0.50 Inches) Thickness Clock Panel | Wide Application: They Are Fit For Cross-Stitch Three-Dimensional Embroidery Craft Clock Frame-Less Draw Clock And Very Suitable For Diy Quartz Wall Clock Replacement Movement Parts Etc. | Warm Notice: There Are Some Clock Parts Made Of Aluminum Please Do Not Install Them With Too Much Pressure Or They Will Be Bent