2 Horizontal Blinds Metal Hold Down Brackets 2

2 Horizontal Blinds Metal Hold Down Brackets 2

Hold Down Bracket For Some 2 Inch Blinds Zinc Plated Made For 2 Wood Blinds And Faux Wood Blinds Comes With One Pin Per Bracket If You Need To Drill A Hole In The Bottom Rail Of Your Blinds To Accommodate The Pin Use A 764 Or 332 Drill Bit How To Install 1 You Will Need A Drill And A Bit Set Or A Driver Set Or A Screwdriver A Tape Measure Hammer And Pencil 2 If The Bottom Rail Does Not Have Pins Installed Drill A Hole In The Center About A 12 Deep Using A 764 Or 332 Drill Bit To Accommodate The Pin On Both Sides Of The Rail 3 Tap The Pins In 4 With The Blind Down And The Bottom Rail Even Put A Hold Down Bracket In Place And Mark Its Position With A Pencil 5 Install The Bracket Onto The Door With Screws 6 Measure The Position Of This Bracket That Is Now Screwed In Place On The Door And Mark The Other Side 7 Then Repeat The Previous Steps To Install The Second Bracket There Are Also Videos On Youtube On How To Install These Brackets

Features of 2 Horizontal Blinds Metal Hold Down Brackets 2

Durable Metal Hold Down Brackets For Most 2 Blinds.

The Pin Is Meant To Loosely Fit Inside The Hole Of The Bracket.

For Further Instruction On How To Install Please See The Product Decription Section Below.

A Package Quantity Of 2 Means You Will Receive 2 Pairs (4 Individual Brackets And 4 Pins.)

A Package Quantity Of 8 Means You Will Receive 8 Pairs (16 Individual Brackets And 16 Pins.)