SecosAutoparts High Output Magneto Ignition Stator Compatible with Yamaha YFZ 450 2004-2009 2012-2013 Replace 5TG-81410-00-00, 5TG-81410-01-00, 5TG-81410-02-00, 5TG-81410-03-00, 5TG-81410-10

SecosAutoparts High Output Magneto Ignition Stator Compatible with Yamaha YFZ 450 2004-2009 2012-2013 Replace 5TG-81410-00-00, 5TG-81410-01-00, 5TG-81410-02-00, 5TG-81410-03-00, 5TG-81410-10

Brand new high output stator

Pick up pulsar coil included,Connector included,Opposite connector included,Rubber grommet included,Highest grade lamination materials.Highest grade copper windings, resistant to 200 degrees Celsius, All products shipped are tested

Description:

VEHICLE MODELS FITMENT:

Compatible With WITHc Yamaha YFZ 450 -- 2004-2009, 2012-2013

PART REPLACEMENT:

5TG-81410-00-00

5TG-81410-01-00

5TG-81410-02-00

5TG-81410-03-00

5TG-81410-10-00

INSTRUCTIONS:

Before installing your new stator:

Check the AC output of the stator.

Replace any burned or corroded connectors on stator and regulator/rectifier

Check and repair any melted wiring.

Use hi-temp dielectric grease on all connectors

All of the wires are installed in the correct order; please do not change any of the wiring configurations.

This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.

If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010

Package includes:

1 High Output Stator as pictures

Features of SecosAutoparts High Output Magneto Ignition Stator Compatible with Yamaha YFZ 450 2004-2009 2012-2013 Replace 5TG-81410-00-00, 5TG-81410-01-00, 5TG-81410-02-00, 5TG-81410-03-00, 5TG-81410-10

Fitment: Compatible with Yamaha YFZ 450 2004-2009 2012-2013 | Replaces Part Numbers: 5tg-81410-00-00 5tg-81410-01-00 5tg-81410-02-00 5tg-81410-03-00 5tg-81410-10-00 | 20% More Output Over Stock, Works With All Other Components.All Item Pictures Are Accurate; If In Doubt Do Not Hesitate To Compare Our Item To Your Original Part | Excellent workmanship and strict inspection before leaving the factory are necessary conditions for product reliability, stability and long-term use. All products have been tested on the machine before leaving the factory. We will check the products again before shipping for you! | If You Have Any Problems After Receiving The Product, Please Contact Us Directly And We Will Solve Your Problem As Soon As Possible