Primeline U 9512Brass Single Bore Hole Lock And Door Reinforcement Plate For 134 In Thick Doors Brass Finish Single Pack

Primeline U 9512Brass Single Bore Hole Lock And Door Reinforcement Plate For 134 In Thick Doors Brass Finish Single Pack

Product Descriptionthe Defender Security U 9541 Solid Brass Lock And Door Reinforcer Assists In Preventing Forced Entry By Reinforcing The Weak Spot Of Your Door It Can Be Used To Reinforce And Repair Metal Fiberglass And Wood Doors Constructed Of Ssolid Brass The Lock Reinforcer Plate Comes In A Brass Finish All The Necessary Mounting Hardware Is Included For A Quick And Easy Installation The Lock Reinforcement Plate Is Prepunched For Mounting The Reinforcer Is Designed For Snug Fit On A 134 Inch Thick Doors Measuring 378 Inch Wide By 9 Inch Tall The Reinforcement Plate Accommodates Keyin Knob Locksets On Doors That Have 218 Inch Bore Sizes With A Backset Of 238 Inch From The Edge Of The Door The Door Reinforcer Is Recessed For Latch Installation When Door Latch Area Is Damaged Install The Door Reinforcer And Then Insert The Latch Through The Recessed Area For Proper Mountingfrom The Manufacturerthis 2 Piece Shield Is Constructed From Steel And Comes Plated In Brass The Interlocking Brackets Help To Protect Your Door From Forced Entry It Requires No Mortising And May Be Applied To Wood Or Metal Inswinging Doors

Features of Primeline U 9512Brass Single Bore Hole Lock And Door Reinforcement Plate For 134 In Thick Doors Brass Finish Single Pack

Added Security - Prevent Forced Entry By Reinforcing The Weak Spot Of Your Door With The Non-Recessed Door Lock Reinforcer; Use To Reinforce And Repair Both Metal Fiberglass And Wood Doors When The Latch Area Has Been Compromised

Built To Last - Made Of Solid Brass The Door Lock Reinforcement Plate Comes In A Natural Finish To Fit Over A Single Bore Hole On Your Door

Easy Installation - All The Necessary Mounting Hardware Is Included With The Lock Reinforcement Plate For A Quick And Easy Installation; The Door Reinforcer Plate Is Pre-Punched For Mounting. Remove The Protective Film After Installation

Dimensions - The Door Lock Reinforcement Plate Is Designed For 1-3/4 Inch Thick Doors Only That Have A 2-1/8 Inch Bore Hole Through The Door With A 2-3/8 Inch Backset From The Edge Of The Door To The Center Of The Bore Holes

Note - Make Sure To Dry Fit The 3-7/8 Inch Wide By 9 Inch Tall With A 0.03 Inch Thickness Door Lock Reinforcer Before Permanently Installing And Refer To The Line Art Drawing And Compare With Your Needs Before Purchasing