CCS Smart Pads DA 5.5 inch Foam Pad (3-White, 3-Orange, 5.5)

CCS Smart Pads DA 5.5 inch Foam Pad (3-White, 3-Orange, 5.5)

Lake Countrys CCS Dual Action 6.5 inch Smart Pads Foam Pads are flat full contact buffing pads that work with your dual action orbital polisher to correct automotive paint more easily than ever before. The CCS Smart Pads user-friendly features provide better control, less product waste, and a more successful detail. CCS Foam Pads help reduce product waste.Lake Country has improved upon the basic pad design with CCS technology, which actually slows the rate of product absorption and saves polish. With conventional foam pads, polish is absorbed into the foam rather quickly. This reduces the working time with the polish and may give you disappointing results. A build-up of chemicals inside the foam will also cause the pad to dry out more rapidly. CCS stands for Collapsed Cell Structure. The face of a CCS pad is covered in strategically placed pockets. These pockets are locations where the foam cells have been closed. Polish does not absorb into these closed cell pockets, leaving more product on the pad's surface and on the paint. This polish-saving design gives polishes a longer working time, which results in more successful detailing.

Features of CCS Smart Pads DA 5.5 inch Foam Pad (3-White, 3-Orange, 5.5)

The New and Improved CCS Pads by Lake Country! This convenient, money-saving kit will supply you with all the pads you will need to perform a 2-step compounding/polishing paint correction detail to your car's paint.Kit Includes: 3- 5.5 Orange CCS pads and 3-5.5 White CCS pads | Slows rate of polish absorption - As discussed above, the pads are slow to absorb products and therefore the paint benefits from a longer working time. The same is true of liquid waxes and sealants. | Improves operator control - CCS pockets gradually release polish as needed by the operator. Since these areas are not absorbing polish, they serve as little reservoirs until the excess polish is needed. | Prevents pad skipping - CCS pockets reduce surface tension allowing the operator to run pad flat on a working surface. Basically, the CCS pockets break up the smooth surface of the foam to eliminate the sticking and skipping that occurs when two perfectly flat surfaces meet. | Creates less heat - CCS pockets provide several points where the foam is not completely touching the paint. This reduces friction and therefore heat generated between the pad and the paint.