In stock

Car Smoke Machine, EVAP Smoke Leak Tester Detector, Automotive Fuel Leakage Diagnostic Tester, 2 MODES Car Conduit PIPE System Leakage Tester,Car Fuel Leak Detector For 12V Vehicle Boat With FlowMeter

0 reviews  
333.94 New Brand:
SKU: ADIB00UJVDZWK
Model: MOT232-SDT206
UPC : 0710882313807
Only 3 left in stock - Order Now.
Price:
$333.94
Free Shipping

Taxes will be calculated at Checkout.
US Delivery Time: 3-5 Business Days.


Qty:


Car Smoke Machine, EVAP Smoke Leak Tester Detector, Automotive Fuel Leakage Diagnostic Tester, 2 MODES Car Conduit PIPE System Leakage Tester,Car Fuel Leak Detector For 12V Vehicle Boat With FlowMeter


Operation

1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch, and detector starts to work.
6.Adjust the flow gauge. Control the input smoke value and pressure to make sure the pipe system can afford the pressure.
7.In about 3 minutes, the pipe will be filled with smoke.
8.Observe the floating ball in flow gauge. If the floating ball stays still in the bottom, the pipe is sealed with. If the floating ball is arising or bouncing, the pipe is leaking.
9.Position the leak points by floating ball. If the bounce arises highly, the leakage is serious.
10.Check the leak points. Please use head lamp if necessary.
11.After leak detection, please connect well the wires and pipe.
Do not run the detector over 5 minutes. It needs interval rest.
The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later.

Maintenance

With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly.
1.Before filling new oil, please pour out the remaining oil in the detector.
2.When the smoke output has water drops, please replace with new oil.
3.Liquid paraffin and baby oil are OK. Please fill new oil with equipped oil bott

Features of Car Smoke Machine, EVAP Smoke Leak Tester Detector, Automotive Fuel Leakage Diagnostic Tester, 2 MODES Car Conduit PIPE System Leakage Tester,Car Fuel Leak Detector For 12V Vehicle Boat With FlowMeter

  • ?? [Wide Range of Applications]: For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models.
  • ??[Powerful and Easy to Operate ] : It has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. Simply connect the detector with the DC12V battery, it can output thick smoke within 30s after turning on.
  • ??[Advanced Technology]: It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flowmeters for accurate data display & Independently controlled Air mode and Smoke mode.
  • ??[Safety]: This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ?, it will automatically turn off the power to secure the safety of both the operator and device.
  • ??[3 Years Warranty]: For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
  • Write a review


    Your Name:


    Your Email:


    Your Review:

    Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below:




    Warning Warning - California Proposition 65

    This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.