AlveyTech 9 Tooth Starter Motor for 125cc/150cc, 250cc & 400cc ATVs, Dirt Bikes, & Go Karts

AlveyTech 9 Tooth Starter Motor for 125cc/150cc, 250cc & 400cc ATVs, Dirt Bikes, & Go Karts

Here is a part that is sometimes hard to find; the 9 tooth starter motor for 125cc/150cc, 250cc, & 400cc ATVs & dirt bikes. It features clockwise rotation.

This 12 volt starter motor is compatible with the Baja Wilderness Trail 400 (WD400-U).

The starter motor does not include the mounting bolts, so you will need to reuse your scooter or ATV's original bolts.

Specifications:

AFTERMARKET PART SPECIFICATIONS (CURRENT STOCK):
Mounting Hole Diameter: 8 mm
Mounting Hole Center to Center Distance: 53 mm
Number of Teeth: 9
Mounting Cylinder Diameter (with O-Ring): 30 mm
Overall Length of Motor (Including Mounting Flanges and Shaft): 167 mm
Motor Case Diameter: 67 mm

OEM BAJA WD400-U PART SPECIFICATIONS:
Mounting Hole Diameter: 8 mm
Mounting Hole Center to Center Distance: 53 mm
Number of Teeth: 9
Mounting Cylinder Diameter (with O-Ring): 30 mm
Overall Length of Motor (Including Mounting Flanges and Shaft): 173 mm
Motor Case Diameter: 67 mm

Features of AlveyTech 9 Tooth Starter Motor for 125cc/150cc, 250cc & 400cc ATVs, Dirt Bikes, & Go Karts

NOTE: This is an aftermarket ATV starter motor. The OEM Baja Motorsports Wilderness Trail 400 (WD400-U) ATV starter motor has been discontinued and is no longer available anywhere. | This starter motor has the same drive shaft and spline setup as the original Baja ATV part, but the mounting bracket is not a direct bolt on match. | You will need to modify the mounting setup on your ATV to allow mounting of this starter motor to be compatible with the Baja Wilderness Trail 400 ATV. | This is the only known electric starter motor that can be made to work on the now discontinued Baja Wilderness Trail 400 ATVs.