Meguiar'S Scratch-X, Fine Scratch And Blemish Remover, 7 Fl. Oz., Factory

Amazoncomscratchx 20 Is The Must Have Cleaner For Isolated Paint Problems Because Its Micro Abrasives Help In The Removal Of Fine Scratches, Blemishes, Oxidation, Light Stains And Surface Contaminants From The Vehicles Paint Scratchx 20 Formula Will Not Damage The Paint, And Will Restore The Brilliance And Clear Finish Of The Painted Surfaces Meguiaras Scratchx 20 Is Easy To Use By Hand, But May Also Be Used With Meguiaras Da Power System Or With Meguiaras Dual Action Polisher Easy To Apply For Showroom Quality Results Evaluating The Paint Surfacebefore Applying Meguiars Scratchx 20 To The Vehicle, Begin By Washing And Drying The Car Thoroughly, As It Will Allow Evalutating The Surface Of The Vehicle For The Presence Of Various Defects Needing Correctiondefects Fall Into Two Basic Categories: Above Surface Bonded Contaminants (Industrial Fall Out, Paint Overspray, Tree Sap Mist, And Bird Droppings) And Below Surface Defects (Fine Scratches, Swirl Marks, Etching, And Oxidation) Above Surface Bonded Contaminants Often Cannot Be Seen But They Can Be Felt Run A Clean Hand Over The Paint Of The Vehicle Immediately After Washing And Drying It Does The Paint Feel As Smooth As Glass If The Paint Surface Is Rough To The Touch, This Is An Indication To Clay The Car Using Meguiaras Smooth Surface Clay Kit First Below Surface Defects Generally Cannot Be Felt, But They Can Be Seen, Especially In Strong, Direct Lightgood Lighting Is Critical To Evaluating The Surface Of The Paint, Because Most Cars Will Look Good In The Shade Therefore Inspect The Cars Finish In Direct Sunlight Or Under Strong Fluorescent Lights Cobweb Or Spider Web Swirls Come Primarily From The Washing And Drying Process When Poor Technique Or Tools Are Used For Example, The Use Of Old Towels, Dishwashing Detergents, And Coarse Sponges Holograms However, Are A Specific Type Of Defect Caused By The Improper Use Of A High Speed Rotary Buffer These Types Of Defects Not Only Mar The Finish But Reduce The Paintas Ability To Reflect Light Clearly And Cleanly, Making The Paint Appear Dull, Faded And Awashed Outa Removing Below Surface Defects Like Light Scratches, Swirls, Oxidation And Bird Dropping Etching Restores The Clarity And Reflectivity Of The Paint, Making Colors More Vibrant And Reflections More Brilliant Use To Remove Light To Moderate Scratching And Swirling A Few Tips About Applying Scratchx 20Liquid Paint Cleaners Should Be Applied To Small Areas At A Time, No Larger Than One Square Foot When Working By Hand Or Two Square Feet When Working With A Dual Action Polisher Such As The Meguiars Da Power System Or Meguiars Dual Action Polisher Working Small Areas At A Time Is Crucial In Order To Concentrate The Work Rather Than Spreading It Out Over A Too Large Of An Area Keep The Following Points In Mind When Working With Any Apaint Cleanera Like Meguiars Scratchx: Paint Cleaners Do Not Need To Dry Before Removing And In Fact Should Be Wiped Off Immediately After Theyre Worked Over The Finish Paint Cleaners Need To Be Worked Into The Finish They Are Not Wipe On, Wipe Off Products Deep Defects (Scratches) That Go Through The Clear Coat Cannot Be Corrected Without Repainting Or Applying Touch Up Paint The Harder The Paint And The Deeper The Defect, The Smaller The Area To Work At One Time Paint Cleaners Remove Everything Off The Surface Of The Paint Including Wax, So After Using Paint Cleaner Re-Apply A Protective Coating Of Wax Applying Scratchx 20By Hand: 1 Dispense A Small Amount Of Meguiaras Scratchx Directly Onto A Foam Applicator Pad Or A Small, Clean 100% Cotton Terry Towel 2 Work A Small Section (1A X 1A) At A Time, Until The Scratchx Starts To Turn Clear Apply Additional Scratchx As Needed Until Defects Have Been Removed 3 Before Moving On To The Next Section, Use Meguiaras Supreme Shine Microfiber Towel To Wipe Away Any Product Residue Before It Dries 4 Repeat Steps 4 And 5 As Needed To Complete The Rest Of The