Quicksilver 802878Q55 Corrosion Guard Rust Inhibitor

Frequently Asked Questions

• Q: What is the size of the Quicksilver Corrosion Guard Rust Inhibitor? A: The Quicksilver Corrosion Guard Rust Inhibitor comes in an eleven ounce spray can. Its dimensions are eight point twelve inches in length, five point fifty-one inches in width, and eight point five inches in height.
• Q: What materials are used in the Quicksilver Corrosion Guard? A: The Quicksilver Corrosion Guard is made from various materials. It is specifically designed as a spray-on protectant for metal and painted surfaces.
• Q: Is this product hazardous? A: Yes, the Quicksilver Corrosion Guard contains aerosols and is flammable. It should be handled with care and stored away from heat sources.
• Q: How do I apply the Quicksilver Corrosion Guard? A: To apply, simply spray the Corrosion Guard evenly on bare metal or painted surfaces. Ensure the area is clean and dry before application for optimal results.
• Q: Is Quicksilver Corrosion Guard suitable for all metal surfaces? A: Yes, it is suitable for various metal surfaces including out drives, lower units, and power trim motors. However, avoid spraying on surfaces coated with biocide paint.
• Q: Can I use this product indoors? A: It is not recommended to use the Quicksilver Corrosion Guard indoors due to its flammable nature. Always apply in a well-ventilated area.
• Q: How should I store the Quicksilver Corrosion Guard? A: Store the Quicksilver Corrosion Guard in a cool, dry place away from heat sources. Keep it upright and out of direct sunlight.
• Q: What safety precautions should I take when using this product? A: Always wear protective gloves and eyewear when using the Corrosion Guard. Avoid inhalation and ensure adequate ventilation during application.
• Q: What if I accidentally spray it on a biocide paint surface? A: If Quicksilver Corrosion Guard comes into contact with biocide paint, it may damage the surface. Wipe it off immediately and check for any adverse effects.
• Q: How often should I apply the Corrosion Guard? A: For optimal protection, it is recommended to apply the Corrosion Guard regularly, especially before and after storage of metal equipment.
• Q: Is this product effective against rust? A: Yes, Quicksilver Corrosion Guard is designed to prevent rust from forming on metal surfaces. It forms a water-resistant barrier to protect against corrosion.
• Q: Can I use this product on painted surfaces? A: Yes, it is safe to use on both bare metal and painted surfaces. Ensure the painted surface is clean before application.
• Q: What is the shelf life of the Quicksilver Corrosion Guard? A: While specific shelf life can vary, it is best to use the Corrosion Guard within three years of purchase for maximum effectiveness.
• Q: Is the Quicksilver Corrosion Guard suitable for marine applications? A: Yes, it is specifically designed for the marine industry and helps protect boat components from rust and corrosion.
• Q: What should I do if the product arrives damaged? A: If the Quicksilver Corrosion Guard arrives damaged, contact the retailer for a return or replacement as per their policy.
• Q: Can this product be used on automotive components? A: Yes, it can also be used on various automotive components to prevent rust and corrosion, as it is formulated for high-performance protection.